1. If the filled product is always the same glue, the glue will not be changed in the middle. In the middle, because the product was not supplied, the glue was not used up and needed to be put aside for a few days. In these cases, cleaning is very simple. If there is an automatic cleaning function, open the cleaning valve, click the automatic cleaning button in the operating system, and the machine will automatically complete the cleaning work; If there is no automatic cleaning function, you only need to remove the dynamic mixing pipe on the double liquid automatic glue filling machine and wash it in alcohol or detergent.
Some customers asked, if not cleaned, will other places be blocked? This will not happen, because the double liquid automatic glue filling machine, a glue and B glue are separated, and AB glue will solidify only after contact. Double liquid automatic glue filling machine: after the glue comes out from barrel a and barrel B, the impeller in the mixing pipe is driven by the high-speed rotation of the motor to cut and mix the AB glue, so the contact part is only at the mixing pipe, and there is no contact in other places.
All glue will not solidify and block the pipeline. The double liquid automatic glue filling machine has very good sealing and has a certain pressure maintaining function. So even if you don't fill glue in the middle, the machine will not come into contact with the air and there will be no chemical reaction. It can be reused for a few days. Generally, there is no problem.
2. If the glue needs to be replaced or the glue in the machine is not used up, the next batch of products can not be used until more than half a month. You should clean them all, because mixing different glue will produce a series of problems, such as glue poisoning. If it has one key priority cleaning function, the operation is relatively simple. Press the cleaning key and the machine will complete automatically.
If the double liquid automatic glue filling machine does not have one key cleaning function, drain the unused glue before cleaning, and then put organic solvents such as Tianna water and industrial alcohol into the machine; Then press these organic solvents and glue together and blow them open with an air gun. With this type of machine, cleaning is very necessary. Otherwise, if it is not used for a long time, it will be troublesome for the glue to solidify in the glue valve or in the material barrel, and some accessories may have to be replaced. So every time you use it, you must remember to clean it.
News Center